Contact FormDPDT

Contact MaterialSilver Alloy

Control Voltage24 VAC

Current Rating10 A

Dimensions3.1" Overall L x 1.7" W x 2.4" H

FunctionAlternating

Insulation Resistance1000 Megohms

Mounting TypeSocketable

Number of Pins8 Pin

Operating Temperature-28 to +65 °C

Primary TypePower Relays

Product DescriptionAlternating relays are used in special applications where the optimization of load usage is required by equalizing the run time of two loads. This alternating action is initiated by a control switch, such as a float switch, manual switch, timing relay, pressure switch, or other isolated contact. Each time the initiating switch is opened, the output relay contacts will change state, thus alternating the two loads. Two LED indicators show the status of the output relay. Each version is available with an optional three position selector switch. This allows the unit to alternate the two loads as normal, or lock the relay to one load or the other. By locking the alternating relay to one load, the other load can be removed for service without rewiring the first load for continuous operation. The selector switch has a low profile to prevent any accidental changes in status.

Product HeaderDPDT Cross-Wired Alternating Relay

Relay TypeElectromechanical

StandardscUL ; UL ; CSA ; CE

Termination11-Pin Octal

Voltage Rating240 VAC